• GLUEDEVIL Super Glue Card Of 12 X 3g - Premium Hardware Glue & Adhesives from Gluedevil - Just R 145! Shop now at Securadeal
1 1

Gluedevil

GLUEDEVIL Super Glue Card Of 12 X 3g

GLUEDEVIL Super Glue Card Of 12 X 3g

R 145.00
R 145.00
Sale Sold out
VAT included. Shipping calculated at checkout.

FREE Shipping over R650* or R99* Flat rate

We offer FREE Shipping over R650* or R99* Flat rate. So get shopping now! Terms & Conditions Apply shipping policy

A10703

GLUEDEVIL SUPER GLUE is a really, really, really strong clear liquid adhesive that bonds like lightning at room temperature. It is especially powerful on non-porous surfaces such as metal, ceramics, rubber, plastic, glass, china etc. Also potent on porous materials such as leather, wood, fabrics, cardboard and paper.

TYPICAL PROPERTIES OF UNCURED MATERIAL:

Base

Ethyl Cyanoacrylate

Colour

Transparent, colourless to yellowish liquid

Specific Gravity @ 25ºC

1.10

Refractive Index (n D 20)

1.439

Flash Point

See MSDS

Vapor Pressure (hPa)

< 1

Viscosity (cP) ，25℃

80 – 120

Shelf life

12 months

CURING PERFORMANCE:

There are many factors that can influence the rate of cure. These include: the types of substrates used, the condition of the surface to be bonded, the smoothness of the surface, the closeness of the surfaces, the atmospheric conditions etc.

Substrate/ Cure Speed

Steel to Steel

10 – 30 seconds

Stainless Steel

30 – 60 seconds

Aluminium

5 – 15 seconds

Zinc plated

30 – 90 seconds

ABS to ABS

5 – 20 seconds

ABS to NBR

3 – 5 seconds

ABS to Wood

5 – 10 seconds

NBR to NBR

5 – 10 seconds

Wood

60 – 75 seconds

Polycarbonate

20 – 60 seconds

Leather

30 – 60 seconds


ABS - Acrylonitrile Butadiene Styrene

NBR - nitrile butadiene rubber


Cure Speed / Humidity

The following graph shows the tensile strength developed at different levels of humidity.

Cure Speed / Bond Gap

The rate of cure depends on the bond-gap. A smaller bond-gap results in faster cure speeds.

TYPICAL PROPERTIES OF CURED MATERIAL:

Physical Properties

Color

Clear

Coefficient of Thermal Expansion (K-1)

100 x 10-6

Coefficient of Thermal Conductivity (W/m.K)

0.10

Softening Point

165ºC

Electrical Properties

Volume Resistivity (Ω.cm)

1 x 1016

Surface Resistivity (Ω)

1 x 1016

Dielectric Constant @ 10 kHz

2.75

Dielectric Dissipation Factor @ 10 kHz

<0.02

Dielectric Breakdown Strength (kV/mm)

25

 

ADHESIVE PERFORMANCE:

After 24 hours at 25ºC.

Tensile Strength

Steel

190 – 210 Kg/ cm2

Stainless Steel

250 – 450 Kg/ cm2

Aluminum

170 – 190 Kg/ cm2

Copper

150 – 170 Kg/ cm2

PVC

40 – 60 Kg/ cm2

ABS

50 – 70 Kg/ cm2

Polycarbonate

80 – 120 Kg/ cm2

Polystyrene

30 – 45 Kg/ cm2

NBR

5 – 9 Kg/ cm2

SBR

5 – 10 Kg/ cm2

 

TYPICAL ENVIRONMENTAL RESISTANCE:

Hot Strength: 

Heat Ageing:

DIRECTIONS FOR USE:

Bond speed is very fast so ensure that parts are properly aligned before bonding. Activators may be required if there are gaps or porous surfaces. Some plastics may require application of a Primer.

  • Ensure surfaces to be joined are clean, dry and grease-free.
  • Unscrew nozzle from the tube and remove loosed plastic ring. Screw nozzle back onto the tube until the built-in piercer breaks through the membrane, while taking care not to squeeze the tube.
  • Apply GlueDevil Super Glue to one surface only.
  • Join surfaces immediately and apply pressure for 30 seconds.
  • Clear nozzle, replace cap and store in a refrigerator or deep-freeze for maximum product life.

HANDLING AND STORAGE:

Storage:           

Keep products in the unopened container in a cool and dry place. Best when stored at 2°C to 8°C. Temperatures less than 2°C can adversely affect product properties. Do not freeze. Keep container tightly closed until ready for use.

Handling:    

Material removed from containers may be contaminated during use. Do not pour any of the product back into the original container. Misuse of the product will void all warrantees.

PACKAGING:

3g display card of 12

PRECAUTIONS:

  • Use in well-ventilated areas.
  • Avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with solvent such as acetone, or nitromethane. Do not try to remove forcibly.  If adhesive gets into eyes, rinse thoroughly and seek medical attention immediately.
  • Keep out of reach of children.
  • Keep adhesive in a cool, dry place at 20°C -25°C (68°F -77°F). For long-term storage, refrigeration (2oC or 35oF) is recommended.

HEALTH AND SAFETY:

For more information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing, physical, ecological, and toxicological and other safety related data

Disclaimer: The data contained herein are furnished for informational purposes only and are believed to be reliable. However, National Adhesive Distributors CC does not assume responsibility for any results obtained by persons over whose methods National Adhesive Distributors CC has no control. It is the user’s responsibility to determine the suitability of National Adhesive Distributors CC products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any National Adhesive Distributors CC products.  National Adhesive Distributors CC specifically disclaims all warranties express or implied, including warranties of saleability and suitability for a particular purpose arising from sale or use of National Adhesive Distributors CC products. National Adhesive Distributors CC further disclaims any liability for consequential or incremental damages of any kind including lost profits.

What's in the box:

1 x GLUEDEVIL Super Glue Card Of 12 X 3g

View full details