1 3

POWR

POWR RUBBER SEAL Waterproofing Kit All Purpose Charcoal 1 Litre

POWR RUBBER SEAL Waterproofing Kit All Purpose Charcoal 1 Litre

R 98.00
R 98.00
Sale Sold out
VAT included. Shipping calculated at checkout.

FREE Shipping over R650* or R99* Flat rate

We offer FREE Shipping over R650* or R99* Flat rate. So get shopping now! Terms & Conditions Apply shipping policy

W11450

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.

FEATURES:

  • Robust, flexible, water based acrylic polymer rubberized coating for waterproofing, sealing, encapsulating and protecting all surfaces.
  • INTERIOR / EXTERIOR
  • Colours: Black | Light Grey | Terracotta

PERFORMANCE BENEFITS:

    • Bonds to most construction materials
    • Elongates 100% with 95% recovery - 
  • Highly stretchable and contracts to its original form.
  • Withstands thermal cycling
  • Puncture resistant
  • Strong UV exposure
  • Withstands exposure to industrial chemicals
  • Improves lifespan of coated substrates.
  • Corrosion control.
  • Encapsulation (Asbestos).
  • Environmentally Friendly and can be applied were rainwater is harvested.
  • Waterproofing that can withstand ponding of water.
  • Can be applied to all construction materials
  • Spray, paint or roller applied.
  • Total ambient temperature application - No heating or propane flame heating required.
  • Seals joints and covers fine cracks

PRODUCT USES:

  • For all roof types/structures including:
  • Fibre cement roof sheets
  • Cement roof tiles
  • Chromadek
  • Zinc Alum and AluZinc
  • Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:

  • Always Mix POWR Rubber Seal well before use.
  • Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
  • Do not dilute POWR Rubber Seal (application ready)
  • Apply two coats by brush or roller
  • A third coat is recommended for coastal areas.
  • Determined by the condition, allow approximately an hour drying time between coats.
  • Touch dry time is approximately 2 hours in hot dry conditions (25°C)

BEST USED WITH:

POWR Bonding Liquid Bonding Agent:

POWR Membrane Patches Premium Grade:

POWR Waterproofing Tape Premium Grade:

POWR Waterproofing Membrane Premium Grade:


POWR WATERPROOFING MEMBRANE APPLICATION:

  • Apply a generous coat of POWR Rubber Seal.
  • Press membrane into wet POWR Rubber Seal surface.
  • Apply a generous coat of POWR Rubber Seal over the membrane until covered and allow to dry for 90 minutes
  • Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:

Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.


NEW METAL SURFACES:

Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:

Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:

An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:

Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.

APPLICATION:

  • Apply a coat of Anti Corrosion Metal Primer.
  • Prime all areas (full primer) and allow to dry for +- 8 hours.
  • Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:

Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.

Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.

APPLICATION:

  • Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
  • Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:

  • Coverage will vary depending on the substrates/surface porosity.
  • Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:

To ensure warranty a maintenance coat must be applied every 3 - 4 years


WHAT MAKES IT UNIQUE:

  • Spray or brush applied at ambient temperature
  • Cures into a seamless membrane
  • Excellent Waterproofing
  • Corrosion resistance
  • Chemical resistance
  • Encapsulation


ROOF COVER APPLICATION:

  • Waterproofing
  • Encapsulating
  • Rust Prevention
  • Rust Rehabilitation
  • Chemical protection

ROOF SURFACES:

  • Metal Sheeted Roofs
  • Tiled Roofs
  • Asbestos / Nutech Roofs
  • Concrete Slab Roofs


CLEAN UP:

Clean equipment with warm, soapy water


TRANSPORTING PAINT:

It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:

  • Keep out of reach of children.
  • Read the label before use
  • Ensure good ventilation during application and drying.
  • In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
  • Store in a closed container.
  • Store in a well-ventilated place.
  • Keep cool.
  • Dispose of contents/containers by local regulations
  • Refer to safety data sheets and technical data sheets for further information

Complete roof solution for 200m² roof

IBR and Zinc Roofs
8 x 20lt Powr rubber seal
4 x 5lt etch primer.
16 x 100mm x 20m membrane
6 x 125mm paint brush
*If you have rusted areas on roof treated areas with 2 x 5lt rust converter

Concrete roof
12 X 20lt Powr rubber seal
4 x 5lt Powr bonding liquid
11 x 1000mm x 20m membrane
4 x 125mm paint brush
4 x paint rollers

Tiled roof
8 x 20lt Powr rubber seal
4 x 5lt Powr bonding liquid
8 x 200mm x 20m membrane
4 x 125mm paint brush
4 x paint rollers

Asbestos and fibre cement roofs
8 x 20lt Powr rubber seal
4 x 5lt Powr bonding liquid
16 x 100mm x 20m membrane
6 x 125mm paint brush

     What's in the box:

    1 x POWR Rubber Seal Waterproofing Coating Charcoal 1 Litre

    1 x POWR Paintbrush

    View full details